Back to catalogue

3D acoustic slat panel

The 3D acoustic slat panel is a square 60 × 60 cm panel with MDF Premium slats mounted on 8 mm felt. Rotate the panels any way you like: alternating vertical and horizontal creates a three-dimensional chequered pattern that plays with light and adds depth to the wall. The felt under the slats absorbs sound reflections and reduces reverberation in the room.

/ panel

Calculate by wall size
×

We calculate the exact quantity from the panel size and enter it in the quantity below.

ESTO 3 instalments · 30 days · payment plan

Measured, not promised

At the frequencies of human speech, the panel absorbs up to 90% of the sound that would otherwise bounce off the wall. That's exactly where the disturbing echo lives: voices, clattering dishes, footsteps on a hard floor.

up to 90%
absorption at 2000 Hz
EN ISO 354
accredited laboratory
Directly on the wall
tested the way you install it
α sound absorption coefficient · frequency Hz

What happens on the wall?

WALL

Open test report (PDF)

Three-dimensional pattern, acoustic base

  1. Laminatethe colour of your choice, on four sides
  2. MDF Premium slatthree-dimensional pattern
  3. Felt 8 mmabsorbs sound waves
  • MDF Premium slatsHigh-quality raw material, dimensionally stable even as humidity changes.
  • Laminate on four sidesThe edges are the same colour, so the wall looks good from every angle.
  • Measured acousticsTested in an independent laboratory to EN ISO 354.
  • Easy installationWith construction adhesive or screws – manageable even the first time.

Technical data

Installing acoustic panels in four steps

  1. 01Measure and cutMeasure the height of the wall and cut the panel to size. Use a fine-toothed saw for a clean cut.
  2. 02Apply the adhesiveApply construction adhesive to the back of the panel or use suitable double-sided mounting tape. Follow the adhesive or tape manufacturer's instructions.
  3. 03Fix the panel to the wallPlace the panel in position and press it firmly against the wall. Check with a spirit level that the panel is straight.
  4. 04Install the next panelsPlace the next panel beside the previous one, line up the grooves and carry on the same way until the whole wall is covered.
You need:SawConstruction adhesive or tapeSpirit levelTape measurePencil

colours · click to see on the product

Choose the right colour.

You only truly see colour and texture in the light of your own home. Samples are free — you only pay 3,60 € postage.

  1. 1 Choose up to 5 colours Samples are free, postage 3,60 €
  2. 2 Delivered in 3 working days At the parcel locker of your choice.
  3. 3 Decide at your own pace See the colours in your own light and next to your furniture.
Order free samples No obligation to buy. The samples are yours to keep.

Frequently asked questions

How quickly will my order arrive?

Your order usually arrives by courier within 7 working days if the item is in the manufacturer's stock, otherwise within 14 working days. Delivery is free on orders from €299.

How do I install acoustic panels?

You can install them yourself: the panel is fixed with construction adhesive or screws and can be cut to size with an ordinary saw. No special tools or builder needed.

Can slat panels be installed on the ceiling?

Yes. On the ceiling, use screws in addition to adhesive.

Do acoustic panels reduce noise from the neighbours?

No. The panels absorb echo inside the room; noise from the neighbours needs sound insulation.

How many panels do I need?

Multiply the wall width by its height and divide by the area of one panel, then add a 5% reserve. The calculator under the "Add to cart" button in the catalogue does this for you.

Can I pay in instalments?

Yes, with ESTO instalments. Choose instalments as the payment method at checkout.

How do I choose the right colour?

Choose up to 5 colours and fill in the sample form. Samples are free — you only pay 3,60 € postage. We'll send them to a parcel locker within 3 working days.

Inspiration

See how the panels look in different homes.